Model 133 Bench Top Press, Price Quote Only
Operation
The Model 133 is a motorized press. It requires 120 volts AC electricity, so it can be used anywhere there is an outlet. It utilizes a 1/2 horsepower electric motor to drive a worm gear reducer. The clutch and cam mechanism design has been proven in many years of service. Its operation is simple: the operator moves the operating lever down, the press cycles. With the optional Single Stroke Control the press will only cycle once until the lever is released and actuated again. Without the Single Stroke Control, the press will continually cycle until the lever is released.
An acme screw and nut, attached below the cast table, regulate depth of stamping. A separate guide rod helps align the table. By turning the acme nut you can raise or lower the table for depth adjustment.
The presses feature a short safe 3/16” stroke, negating the need for external guarding. Our standard dovetail shank allows quick changing of marking devices. The same dovetail is used in all of our presses as well as the Model 116 Dovetail Adapter.
Construction & Parts
The Models 131, 131A and 133 use the same base casting. Our presses are husky, cast iron "C" frames for distortion-free stamping with a smooth, static non-impact marking force. No die cast parts are used. Many imported presses are made using round column construction with a spring release marking force, which may result in a harsh impact shock. The large quick-change dovetail ram evenly distributes the marking force across the marking device frame, with minimal part and marking device stress. Clearances and pressures are the same for each model.
Compatibility
A variety of marking devices can be installed in the presses, depending on part thickness and character capacity requirements.
|
Maximum Part Thickness Chart
|
| Depicts the maximum allowable part thickness, based on the marking device and character size. The total clearance under the ram is 3-3/4”, but can be modified for additional opening; contact the factory for availability. |
|
Marking Device
|
Maximum
Opening
|
|
Model 23P (up to 5/32” character)
|
1-5/8”
|
|
Model 23P (3/16” to 1/4”character)
|
1-1/4”
|
|
Model 70P (up to 1/8” character)
|
1-9/16”
|
|
Model 70P (3/16” to 1/4” character)
|
1”
|
|
Model 50P (up to 1/8” characters)
|
1-9/16”
|
|
Model 50P (5/32” and 3/16” character)
|
1/2”
|
Note: For the Maximum Part Thickness Chart, any Numbering Machine or Type Holder not listed cannot be used in the above presses.
|
|
|
|
Character Capacity Chart
|
| Depicts the maximum number of characters that can be stamped during each impression. These recommendations can be exceeded in many cases. The hardness of a material will affect stamping results. |
|
Character
Size
|
Steel
RC 30
|
Mild
Steel
|
Soft
Brass
|
Aluminum
1100 H26
|
|
1/4
|
3
|
5
|
7
|
12
|
|
3/16
|
4
|
7
|
11
|
16
|
|
5/32
|
6
|
8
|
17
|
36
|
|
1/8
|
9
|
12
|
25
|
48
|
|
3/32
|
10
|
13
|
30
|
63
|
|
1/16
|
12
|
20
|
48
|
96
|
Note: The Character Capacity Chart is based upon the maximum number of characters for a legible impression (.002”-.003” depth).
|
|
Options
- Tripping Attachment (for use with the Model 50P only)
- Adjustable Table (for in-out and left-right movement of table)
- Filter, Lubricator, Regulator, & Gauge (FLR&G) (for Model 131A only)
- Model 113 Strip Holder
- Universal Key Nest
- Custom Nest
Product Specs
|
Bench Space
|
16" Deep, 18" Wide, 18" High |
|
Weight
|
175 lbs. |
|
Throat Depth
|
6" |
|
Clearance between Ram & Table (when adjusted down)
|
3-3/4" |
|
Vertical Adjustment of Table
|
2" |
|
Short Safe Stroke
|
3/16" |
|
Mounting of Numbering Heads, Type and Holders
|
Dovetail |
Any questions call 714-979-1405 or email us at Sales@RubberStampsRus.com