0
$0.00Cart
0
×

Your shopping cart is empty.

View Cart
  • Home
  • Custom and Stock Stamping Devices
  • Name Plates - Signage - Sign Frames
  • Consecutive Numbering Machines
  • Industrial Aerospace Inks
  • Embossers
  • Rubber Stamp Ink Pads
  • Ink Cartridges
  • Notary Public Stamps and Embossers
  • Professional Seals
  • Monograms Stationery Products
  • How To Change a Trodat Ink Cartridge
  • How To Change a Shiny Printy Pad
  • How To Change the Rubber Die
  • Self-Inking vs Pre-Inked Stamps
  • Vehicle Magnetic Signs
  • RibType Size Chart

Enthone M0N Black Gloss Ink - 10cc Packet

SKU: IN-HYS-M0N-B3-10CC
Your Price $72.50
Quantity
 

M9N Enthone-Hysol Black Gloss 10cc Packet with B-3 Catalyst

Size: 1/3 Ounce Bi-Pak

Catalyst: B-3

Meets: CID A-A-56032D Types I & III, conductive.

Formerly: MIL-I-43553b.

Color: #17038 Black.

Characteristics: Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing. Excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions when properly cured. When used with a rubber stamp, use a brayer roller or similar device to roll the ink into a thin drawn down before transferring to the stamp.

Please let us know if you need the Glass Plate, and Roller, and the type of marking device needed to complete your order

MIXING INSTRUCTIONS
Measure ink and catalyst at the proper mix ratio. Both the ink and catalyst should be weighed accurately. Excessive and insufficient amounts of catalyst are detrimental to cured ink film properties. Mix thoroughly without introducing excessive amounts of air. Avoid the use of paper or wax coated cups. Stir from bottom of the container

OBSERVE INDUCTION PERIOD

All catalysts: 30 minutes
Catalysts 45 and 5: 60 minutes
Allow ink/catalyst mixture to stand for at least 30 minutes prior to application. This provides an induction period ensuring a homogeneous mix of resin and catalyst and allows any entrapped air to escape from the mixture. The average pot life begins after the induction period

APPLICATION

50-000 Series inks may be applied by screen printing, spraying, brushing and roller printing. To ensure optimum adhesion, it is imperative that the surface to be printed is clean and free of any residues or particulates.

BLACK and WHITE stocked / all other colors are not as popular and are considered a special order

COMMERCIAL ITEM DESCRIPTION
INK, MARKING, EPOXY BASE

Certified to MIL-I-43553 and AA56032.

The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-I-43553B and MIS-37271 by all federal agencies.

1. SCOPE. This commercial item description covers a catalyzed epoxy system of marking inks for metallic or other non-porous surfaces and printed wiring boards.
2. CLASSIFICATION.
2.1 Type. The marking ink and color shall be of the following types and colors, as specified:

Type I    - General usage
Type II   - Non-conductive ink (e.g., printed wiring boards)
Type III - Outside exposure.

Questions or comments call us at 800-969-6699 or email us at sales@RubberStampsRUs.com

    Product Options and Custom Information
    Certificate of Compliance:
    Special Instructions:

    Customer Reviews